CROSSMEMBER

Filter Results by Vehicle
CROSSMEMBER

A crossmember is a structural section, usually of steel, usually boxed, that is bolted or welded across the frame rails of a vehicle, to support the vehicles motor. For the suspension of any vehicle to operate as it should, for proper handling, and to keep the body panels in alignment, the frame has to be strong enough to handle the loads applied to it. It must not deflect, and it has to have enough torsional strength to resist twisting.

Photo
Description & Part #
Base

’64½-’70 MUSTANG TRACK WIDTH 58″ TW

Part # MTF-201-KIT

Heidts PRO-G IFS kits offer the ultimate in comfort and handling for your ride. Our '64-70 PRO-G independent front suspension is at home on the the autocross without sacrificing the ride on the street. The Mustang kit comes with the PRO-G subframe, tubular control arms, 11" Wilwood rotors with 4 piston Wilwood calipers, 2" dropped spindles, power rack & pinion steering and coil over shocks and springs.

To see more options and available upgrades, please visit the kit page by clicking here.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$5,381.00

1928-1931 FORD CROSSMEMBER-RIGHT HAND DRIVE (BX-101-RH)

Part # BX-101-RH

1928-1931 Ford Superide IFS Kit - Right Hand Drive

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$4,274.00

1928-1931 FORD SUPERIDE KIT (BX-101)

Part # BX-101

Model "A" Ford Superide IFS Kit

Independent Front Suspension gives you twice the ride of a new dropped axle at a comparable cost. It adds more cash value to your car than any other type of suspension. With HEIDTS engineering you get an unmatched, correct, safe ride. HEIDTS SUPERIDE complete system is perfect for the ultimate stance! Shipped via Fed Ex, our SUPERIDE arrives complete hub to hub with no other parts to buy.

Please click here to build your complete kit 

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$3,927.00

1932 FORD SUPERIDE KIT (BX-102)

Part # BX-102

32 Ford Superide IFS Kit

Independent Front Suspension gives you twice the ride of a new dropped axle at a comparable cost. It adds more cash value to your car than any other type of suspension. With HEIDTS engineering you get an unmatched, correct, safe ride. HEIDTS SUPERIDE complete system is perfect for the ultimate stance! Shipped by Fed Ex, our SUPERIDE arrives complete hub to hub with no other parts to buy.

To build your complete kit, please click here

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$3,927.00

1932 FORD SUPERIDE KIT RIGHT HAND DRIVE (BX-102-RH)

Part # BX-102-RH

1932 Ford Superide IFS Kit

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$4,274.00

1933-1934 FORD CROSSMEMBER (PX-101-E)

Part # PX-101-E

1933-1934 Ford Mustang II Crossmember with Shock hats. Our Mustang IFS kits for Fords are natural conversions for the Ford frames. We retain all the factory dimensions and locations, so you get all the benefit of Ford engineering in your front end.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$494.00

1933-1934 FORD IFS KIT

Part # PX-101-E-K-K

1933-1934 Ford complete Mustang II IFS kit. Included are a 3 piece weld in crossmember with upper spring hats already notched for your frame once you install the boxing plates, tubular upper and lower control arms, 11" brakes with GM metric calipers, stock or 2" drop spindles, manual rack and pinion, and standard shocks and springs.  Everything you need to give you independent suspension

To build your complete suspension kit, please click here

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$1,995.00

1933-1934 FORD SUPERIDE KIT (BX-103)

Part # BX-103

1933-1934 Ford Superide IFS Kit

Independent Front Suspension gives you twice the ride of a new  dropped axle at a comparable cost. It adds more cash value to your car than any other type of suspension. With HEIDTS engineering you get an unmatched, correct, safe ride. HEIDTS SUPERIDE complete system is perfect for the ultimate stance! Shipped via Fed Ex, our SUPERIDE arrives complete hub to hub with no other parts to buy. 

To build your complete kit, please click here

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$3,927.00

1933-1934 FORD SUPERIDE KIT RIGHT HAND DRIVE (BX-103-RH)

Part # BX-103-RH

1933-1934 Ford Superide IFS Kit - Right Hand Drive

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$4,274.00

1934-1935 CHEVY STANDARD CROSSMEMBER (CX-101-E)

Part # CX-101-E

1934-1935 Chevy Standard Mustang II Crossmember With Shock Hats

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$494.00

1934-1935 CHEVY STANDARD-IFS (CX-101-E-K-K)

Part # CX-101-E-K-K

1934-1935 Chevy Standard complete Mustang II IFS kit. Included are a 3 piece weld in crossmember with upper spring hats already notched for your frame once you install the boxing plates, tubular upper and lower control arms, 11" brakes with GM metric calipers, stock or 2" drop spindles, manual rack and pinion, and standard shocks and springs.  Everything you need to give you independent suspension.

To build your complete kit, please click here

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$1,995.00

1934-1935 CHEVY SUPERIDE KIT (BX-114)

Part # BX-114

1934-1935 Chevy Superide IFS Kit

Independent Front Suspension gives you twice the ride of a new 4-link dropped axle at a comparable cost. It adds more cash value to your car than any other type of suspension. With HEIDTS engineering you get an unmatched, correct, safe ride. HEIDTS SUPERIDE complete system is perfect for the ultimate stance! Shipped by UPS, our SUPERIDE arrives complete hub to hub with no other parts to buy. 

To build your complete kit, please click here

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$3,927.00

1934-1935 CHEVY SUPERIDE KIT, RIGHT HAND DRIVE (BX-114-RH)

Part # BX-114-RH

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$4,274.00

1934-1936 CHEVY MASTER CROSSMEMBER (CX-111-E)

Part # CX-111-E

1934-1936 Chevy Master Mustang II Crossmember with Shock hats

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$494.00

1934-1936 CHEVY MASTER MUSTANG II IFS

Part # CX-111-E-K-K

1934-1936 Chevy Master complete Mustang II IFS kit. Included are a 3 piece weld in crossmember with upper spring hats already notched for your frame once you install the boxing plates, tubular upper and lower control arms, 11" brakes with GM metric calipers, stock or 2" drop spindles, manual rack and pinion, and standard shocks and springs.  Everything you need to give you independent suspension.

To build your complete suspension kit, please click here

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$1,995.00

1935-1940 FORD -IFS

Part # PX-102-E-K-K

1935-1940 Ford complete Mustang II IFS kit. Included are a 3 piece weld in crossmember with upper spring hats already notched for your frame once you install the boxing plates, tubular upper and lower control arms, 11" brakes with GM metric calipers, stock or 2" drop spindles, manual rack and pinion, and standard shocks and springs.  Everything you need to give you independent suspension.

To build your complete suspension kit, please click here

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$1,995.00

1935-1940 FORD CROSSMEMBER (PX-102-E)

Part # PX-102-E

1935-1940 Ford Mustang II Crossmember with Shock hats

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$494.00

1935-1940 FORD SUPERIDE II (BX-202)

Part # BX-202

1935-1940 Ford Superide II IFS Kit

Our SUPERIDE II IFS System uses a Mustang II spindle to allow for a front mount rack & pinion unit, this allows for easy engine installation. The upper control arms use threaded adjusters for the wheel alignment. These threaded adjusters, unlike eccentric adjusters, will never slip out of place.

To build your complete kit, please click here

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$3,927.00

1935-1940 FORD SUPERIDE II RIGHT HAND DRIVE (BX-202-RH)

Part # BX-202-RH

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$3,927.00

1937-1939 CHEVY CROSSMEMBER (CX-102-E)

Part # CX-102-E

1937-1939 Chevy Mustang II Crossmember with Shock hats

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$494.00

1937-1939 CHEVY PICK UP-IFS

Part # CX-305-E-K-K

1937-1939 Chevy Pick up complete Mustang II IFS kit. Included are a 3 piece weld in crossmember with upper spring hats already notched for your frame once you install the boxing plates, tubular upper and lower control arms, 11" brakes with GM metric calipers, stock or 2" drop spindles, manual rack and pinion, and standard shocks and springs.  Everything you need to give you independent suspension.

To build your complete suspension kit, please click here

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$1,995.00

1937-1939 CHEVY PICK-UP CROSSMEMBER (CX-305-E)

Part # CX-305-E

1937-1939 Chevy Pick-up Mustang II Crossmember with Shock hats

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$494.00

1937-1939 CHEVY SUPERIDE II (BX-212)

Part # BX-212

1937-1939 Chevy Superide II IFS Kit

Our SUPERIDE II IFS System uses a Mustang II spindle to allow for a front mount rack & pinion unit, this allows for easy engine installation. The upper control arms use threaded adjusters for the wheel alignment. These threaded adjusters, unlike eccentric adjusters, will never slip out of place

To build your complete kit, please click here

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$3,927.00

1937-1939 CHEVY SUPERIDE II RIGHT HAND DRIVE (BX-212-RH)

Part # BX-212-RH

1937-1939 Chevy Superide II IFS Kit Right Hand Drive

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$3,927.00

1937-1939 CHEVY-IFS

Part # CX-102-E-K-K

1937-1939 Chevy complete Mustang II IFS kit. Included are a 3 piece weld in crossmember with upper spring hats already notched for your frame once you install the boxing plates, tubular upper and lower control arms, 11" brakes with GM metric calipers, stock or 2" drop spindles, manual rack and pinion, and standard shocks and springs.  Everything you need to give you independent suspension.

To build your complete kit, please click here

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$1,995.00

1937-1941 WILLYS SUPERIDE II (BX-211)

Part # BX-211

1937-1941 Willys Superide II IFS Kit

Our SUPERIDE II IFS System uses a Mustang II spindle to allow for a front mount rack & pinion unit, this allows for easy engine installation. The upper control arms use threaded adjusters for the wheel alignment. These threaded adjusters, unlike eccentric adjusters, will never slip out of place

To build your complete kit, please click here

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$3,927.00

1937-1941 WILLYS SUPERIDE II RIGHT HAND DRIVE (BX-211-RH)

Part # BX-211-RH

1937-1941 Willys Superide II IFS Kit Right Hand Drive

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$3,927.00

1940-1946 CHEVY PICK-UP CROSSMEMBER (CX-306-E)

Part # CX-306-E

1940-1946 Chevy Pick-up Mustang II Crossmember with Shock hats

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$494.00

1940-1946 CHEVY PICK-UP IFS

Part # CX-306-E-K-K

1940-1946 Chevy Pick up complete Mustang II IFS kit. Included are a 3 piece weld in crossmember with upper spring hats already notched for your frame once you install the boxing plates, tubular upper and lower control arms, 11" brakes with GM metric calipers, stock or 2" drop spindles, manual rack and pinion, and standard shocks and springs.  Everything you need to give you independent suspension.

To build your complete suspension kit, please click here

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$1,995.00

1940-1946 CHEVY PICK-UP SUPERIDE 2 (BX-305)

Part # BX-305

1940-1946 Chevy Superide II IFS Kit

Our SUPERIDE II IFS System uses a Mustang II spindle to allow for a front mount rack & pinion unit, this allows for easy engine installation. The upper control arms use threaded adjusters for the wheel alignment. These threaded adjusters, unlike eccentric adjusters, will never slip out of place

To build your complete kit, please click here.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$3,927.00