ALSTON RACING

Filter Results by Vehicle
Photo
Description & Part #
Base

21”x 38” ALUMINUM WHEEL TUBS

Part # AL-161010

21”x 38” ALUMINUM WHEEL TUBS

Available in your choice of aluminum or steel. Beaded for added strength, these wheel wells features preformed Pittsburgh interlocking seam that makes assembly very simple with a professional appearance.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$187.00

21”x 38” STEEL WHEEL TUBS

Part # AL-161011

21”x 38” STEEL WHEEL TUBS

Available in your choice of aluminum or steel. Beaded for added strength, these wheel wells features preformed Pittsburgh interlocking seam that makes assembly very simple with a professional appearance.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$198.00

24”x 40” ALUMINUM WHEEL TUBS

Part # AL-161012

24”x 40” ALUMINUM WHEEL TUBS

Available in your choice of aluminum or steel. Beaded for added strength, these wheel wells features preformed Pittsburgh interlocking seam that makes assembly very simple with a professional appearance.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$271.00

24”x 40” STEEL WHEEL TUBS

Part # AL-161013

24”x 40” STEEL WHEEL TUBS

Available in your choice of aluminum or steel. Beaded for added strength, these wheel wells features preformed Pittsburgh interlocking seam that makes assembly very simple with a professional appearance.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$220.00

ADJUSTABLE COIL OVER LOWER SHOCK MOUNT

Part # AL-181361

Many racers feel there is an advantage in being able to adjust rear ride height. Our lower mount makes it possible to move rear coil over suspensions a full 4 ½”in ½” increments. This conversion allows you to modify existing, fixed mounted coil over shock set ups.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$115.00

ALSTON COMPACT FRONT INNER FENDER KIT

Part # AL-161912

FEATURES: .032” THICK ALUMINUM, MADE SLIGHTLY OVER SIZED TRIM FOR PERFECT FIT, BEADED FOR EXTRA STRENGTH, ATTACHES TO FIBERGLASS, COMES OFF WITH FRONT END

KIT CONTAINS:

1 - SPLASH PAN TOP PASSENGER SIDE.
1 - SPLASH PAN TOP DRIVER SIDE.
1 - CENTER SPLASH PAN
1 - INNER SPLASH PAN

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$237.00

ALSTON INTERMEDIATE FRONT INNER FENDER KIT

Part # AL-161913

FEATURES: .032” THICK ALUMINUM, MADE SLIGHTLY OVER SIZED TRIM FOR PERFECT FIT, BEADED FOR EXTRA STRENGTH, ATTACHES TO FIBERGLASS, COMES OFF WITH FRONT END

KIT CONTAINS:

1 - SPLASH PAN TOP PASSENGER SIDE.
1 - SPLASH PAN TOP DRIVER SIDE.
1 - CENTER SPLASH PAN
1 - INNER SPLASH PAN

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$386.00

ALSTON LADDER BAR LOCATOR

Part # AL-181371

Bolt-On Track Locator. Use with ALSTON Ladder Bars, Features 5/8” clevis

FAR STRONGER than our standard Track Locator, this Locator has a unique “BOLT-ON” feature. A special threaded clevis, of our own design, replaces the nut on the bolt that attaches the ladder bar to the rear end and chassis. Left and right hand threaded heim joints allow you to make precise bar adjustments, without the need to remove the locator from the car. The extra smooth operation eliminates any bind from the system while keeping the rear end square in the chassis. Made from 7/8 O.D. X 36”, 4130 chrome moly tubing and heavy duty clevis.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$161.00

ALSTON LOWER A-ARMS FOR ALSTON CHASSIS

Part # AL-181423

These precision Lower A-Arms fit all Alston chassis and snouts that use Pinto front suspension. Alston’s A-Arms have several advantages over the stock Pinto arms. First there lighter, stronger, and uses a more compact screw in ball joint (sold separately). The lower shock mount and control link tabs are already attached. Plus they use steel bushings instead of rubber for a more steadier ride. Powder coated for a long lasting beautiful finish and to enhance the appearance of your chassis.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$199.00

ALSTON RACING CONTOURED REAR STRUTS

Part # AL-101516

Now you can have the added strength and security of a roll bar without losing the use of your rear seat. These innovative rear struts are contoured to run along the roof line and down through the package shelf attaching to the upper shock mount. An absolute must for street driven cars, these struts are made from 1 5/8” x .134” wall tubing and are designed for use with our 4 or 8 point roll bars.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$95.00

ALSTON RACING DELUXE SWING OUT SIDEBAR

Part # AL-101520

Our unique spring loaded latching mechanism does the rest. Once the latch is fully engaged the chrome plated safetyslider springs into place locking the side bar securely in place. (For 1 5/8” x .134 wall tubing only)

NHRA legal to 8.50

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$172.00

ALSTON RACING DROPPED CROSS MEMBER

Part # AL-101711

2”x3”x.083 wall rectangle tube 58” long

In addition to adding extra strength to the chassis these cross members feature 3” drop center. The extra driveline clearance, either under or over, provides extra support in the event of driveline failure. The universal design features extra tubing to accommodate almost any kind of frame. Two mandrel bent styles are available, round 1 5/8” and 2”x 3” rectangle mild steel.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$83.00

ALSTON RACING DROPPED CROSSMEMBER

Part # AL-101710

1 5/8”x.134 wall round tube 50” long

In addition to adding extra strength to the chassis these cross members feature 3” drop center. The extra driveline clearance, either under or over, provides extra support in the event of driveline failure. The universal design features extra tubing to accommodate almost any kind of frame. Two mandrel bent styles are available, round 1 5/8” and 2”x 3” rectangle mild steel.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$61.00

ALSTON RACING FUNNY CAR CAGE CONVERSION

Part # AL-101514

Funny Car Cage Conversion- mild steel

Mild steel cage conversion for ALSTON chassis # AL-101810 through AL-101839 only. Kit contains bent and straight tubes to convert your Alston chassis to a funny car style cage as shown. Kit comes complete with all necessary material and instructions. NOTE: These kits are designed to work with ALSTON chassis only – not roll cages.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$220.00

ALSTON RACING LONG FORWARD STRUT CONVERSION

Part # AL-141130

Eliminates firewall flex common to uni-body cars, and
ties the front and rear chassis together through the roll
cage. Two kits are available for either strut or A-Arm
equipped chassis.

For the short bar, please use item AL-141131

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$95.00

ALSTON RACING PRO 9 HOUSING

Part # AL-181016

Designed to fit all popular 9” Ford style differentials. Features 3” axle tubes and internal gussets. Your choice of housing ends Big Ford, Small Ford, GM or Mopar. Please specify width when ordering

Available with back brace which substantially increases strength. Standard housing comes in mild steel, or chose the 4130 Chrome Moly version for heavy cars or high horsepower applications.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$933.00

ALSTON RACING PRO-LINK 4-LINK FRAME

Part # AL-102112

KIT INCLUDES:
Pair 2 X 3 Mandrel Bent Frame Rails
2 x 3 Dropped Cross Member
Pair 2 x 3 Sub Frame Connectors
1 5/8” Upper Coil Over Shock Cross Member
With Tabs & Hardware
1 5/8” Rear Cross Member

OPTIONS:
Wilwood Disc Brake Kit
Strange 35 spline Axles
Strange Center Section

Also Available in 1 5/8” Round Tube item 102111

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$426.00

ALSTON RACING PRO-LINK FUNNY CAR CAGE CONVERSION

Part # AL-101523

Funny Car Cage Conversion Pro-Link - mild steel

Mild steel funny car cage conversion for ALSTON Pro-Link chassis and roll cages. Kit contains bent and straight tubes to convert your roll cage to a funny car style cage as shown. Kit comes complete with all necessary material and instructions.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$220.00

ALSTON RACING PRO-LINK FUNNY CAR CAGE CONVERSION 4130

Part # AL-101524

Funny Car Cage Conversion Pro-Link - 4130 Moly

4130 moly funny car cage conversion for ALSTON Pro-Link chassis and roll cages. Kit contains bent and straight tubes to convert your roll cage to a funny car style cage as shown. Kit comes complete with all necessary material and instructions.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$517.00

ALSTON RACING PRO-LINK FUNNY CAR CAGE CONVERSION 4130 MOLY

Part # AL-101515

Funny Car Cage Conversion- 4130 Moly

4130 moly cage conversion for ALSTON chassis # AL-101810 through AL-101839 only. Kit contains bent and straight tubes to convert your Alston chassis to a funny car style cage as shown. Kit comes complete with all necessary material and instructions. NOTE: These kits are designed to work with ALSTON chassis only – not roll cages.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$414.00

ALSTON RACING ROLL CAGE STRENGTHENING KIT

Part # AL-101511

A three-step addition that provides strength and rigidity to your 8 point roll cage. Improves side and upper cage impact resistance and increases firewall and chassis stiffness. Included are a pair of side bars to X-brace the door panel area, upper cage triangular tubing, dash board brace instructions.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$125.00

ALSTON RACING SHORT FORWARD STRUT CONVERSION

Part # AL-141131

Eliminates firewall flex common to uni-body cars, and
ties the front and rear chassis together through the roll
cage. Two kits are available for either strut or A-Arm
equipped chassis.

For the long bar, please use item AL-141130

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$84.00

ALSTON RACING SPINDLES

Part # AL-501009

Based on the race proven 71-72 Pinto. These spindles are jig-built and fitted with caliper brackets to fit popular Wilwood front brake kits. The steering arms are in the stock location and are designed to directly replace the OEM spindles with no modifications. Engineered to withstand the rigors of drag racing. Alston spindles are also powder coated to ensure long lasting appearance

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$690.00

ALSTON RACING STANDARD SWING OUT SIDE BAR KIT

Part # AL-101519

This design makes existing fixed side bar fully removable or simply swing out for ease of entry or exit. The kit comes complete with precision machined clevises, weld-on brackets and bolts.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$110.00

ALSTON RACING TRACK LOCATORS- PRO LINK

Part # AL-181311

Bolt-On Track Locator. Use with Pro-Link,Features 5/8” bolts

FAR STRONGER than our standard Track Locator, this Locator has a unique “BOLT-ON” feature. A special threaded clevis, of our own design, replaces the nut on the bolt that attaches the ladder bar to the rear end and chassis. Left and right hand threaded heim joints allow you to make precise bar adjustments, without the need to remove the locator from the car. The extra smooth operation eliminates any bind from the system while keeping the rear end square in the chassis. Made from 7/8 O.D. X 36”, 4130 chrome moly tubing and heavy duty clevis.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$161.00

ALSTON RACING TRACK LOCATORS- SPORTSMAN

Part # AL-181312

Bolt-On Track Locator. Use on any Kit or Sportsman 4-Link with 3/4” bolt

FAR STRONGER than our standard Track Locator, this Locator has a unique “BOLT-ON” feature. A special threaded clevis, of our own design, replaces the nut on the bolt that attaches the ladder bar to the rear end and chassis. Left and right hand threaded heim joints allow you to make precise bar adjustments, without the need to remove the locator from the car. The extra smooth operation eliminates any bind from the system while keeping the rear end square in the chassis. Made from 7/8 O.D. X 36”, 4130 chrome moly tubing and heavy duty clevis.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$181.00

ALSTON RACING WISHBONE LOCATOR

Part # AL-181355

The Wishbone Rear Axle Housing Locator is designed to provide an alternative to the track locator for 4-Link suspensions. It is constructed of 4130 chrome moly tubing, includes hardware and all brackets necessary for installation

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$245.00

ALSTON RACING X-BRACE REAR FRAME STRENGTHENING KIT

Part # AL-101510

Our Most popular Pro Gas configuration. Adds a lightweight ALSTON X-Brace and extended rear struts to standard ALSTON 8 and 10 point roll cages, increasing chassis stiffness and rear frame support. The X-Brace's 1 5/8” diameter (.134”) tubing matches ALSTON'S standard roll cage O.D. Instructions included.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$105.00

ALSTON UPPER A-ARMS FOR ALSTON CHASSIS

Part # AL-181424

Specifically designed as a bolt-on replacement for stock Pinto Upper A-Arms used on all Alston chassis and front snouts. They are lighter, stronger, and more compact than stock Pinto A-Arms. Screw-in ball joints (purchased separately), and steel bushings are also used for a steadier ride. This compact design adds greatly to available header clearance. Powder coated for a long lasting beautiful finish and to enhance the appearance of your chassis.

ALSTON A-ARMS are a bolt-on direct replacement for chassis with stock Pinto suspensions.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

$321.00